How Stopping The Car When The Brakes are Free From Tension?

These tips will be useful if one day you run into or find your car vehicle brakes were not working aka relieved.

Often times we just realized the brakes did not function properly when it is run. This is certainly dangerous, because if they can not control it, it is not likely you will experience an accident.

But how to control and stop a car braking system is not functioning properly?

Here are some tips to stop the car when the brake system suddenly not functioning.

The first is to stay away from a sense of panic. Because psychologically, the panic that is something very dangerous and can lead people to think. That’s why do not panic.

Directly press the hazard lights and horn for vehicles around you know you’re in trouble and in an emergency.

Once you can control your feelings, then try to hit the brakes and feel. When the brakes feel soft and can be up to step on the floor, chances are you lack oil or brake master cylinder malfunction or trouble on the brake calipers.

The steps you should take when experiencing this problem is to continuously pump the brakes to restore brake pressure. Do this even if your vehicle has been equipped with the latest anti-lock breaking system (ABS).

But when the gas pedal feels hard, it is likely there is a problem on the pedal or there is something uncomfortable about your brake pedal. Try to find out the

your legs or passenger told another car for a little check.

Well if the two problems mentioned above can not be overcome, there are two solutions. First by making use of engine breaks the employment effects by lowering the transmission into a lower gear. But it also had to use a particular technique.

If your car is a manual car, then gradually lower the gear quickly. So when you’re in the teeth of four for example, lower teeth gradually into gear 3, 2 and 1.

Do not lower the gear directly, eg from 4 directly to the gear teeth 2 or 1 because it will make you actually lose control.

And if you’re using automatic transmission car then do the opposite. Lower the gear directly to the lowest level, usually tooth 1. Usually the earlier methods would be useful to slow the car you are riding.

Then the question, what if the way it also does not work? When that happens, then you should be forced to use your handbrake. But be careful.

Do this slowly and do not be abrupt. Because if suddenly you will most likely lose control of the car that you ride it.

Gently pull your handbrake while continuing to feel the bite of the brake calipers on your wheels. Adjust the pressure in emergency braking, you’re feeling

brake bitten, keep that position until the car slows down.