Repair Car Paint

It is really very simple to restore automotive paint scratches and chips when you have good advice and equipment. A scratch can go into four layers, separate coat, paint, primer and metal. Depending on the depth of the scratch is, you will probably use different approach to painting automotive repair. Here’s what you want to do:

Before beginning the fix, wash your car. Use a car soap, which can be specially prepared to remove all grease, wax scratched, wash the area. Later, to find out how deep the scratches. Knowing that will help you choose the right equipment and products.

Car of light scratches

In the event that the scratch damages only separate layer, it is actually very easy to fix. All you need is a composite of effective quality rub. Then use the gloss and enamel paint protection. Finish with wax.

Medium car scratches

In the case where the base went into the painting, but he did a lot of primer, sanding start with the place that has a very good abrasive. When the site is smooth, use a touch-up paint in layers. Be sure to give each layer of suitable period of drying. Given the fact that everyone has the drying time of paint unique, check the label for instructions. When the paint is dry, use apparently coat. Are mixed in the compound rubbing use, it follows with Polish. Wait a month before applying wax.

Deep scratches car or truck

Fixing deep scratches on the paint can be sure only few other methods. First, check for rust. If you see any development of rust, sand, gravel, reduces abrasive and easy to fine-grained out. Now you might be ready to use primer. The main purpose of ignition must ensure that the successive layers of paint on the surface effectively. Apply 2-3 coats of primer for each layer to provide a sufficiently long time to dry. As soon as the ground is dry, the sand is 600 grit. Touch-up paint should be applied in layers. Paint can be anywhere from 30 minutes up to several hours to dry. After the paint has dried use a clear coat the surface of the safety and brilliance.

When all layers are dry, place stands still serviceable. To mix it with rubbing compound or sand, it is through a grit sandpaper discovered. There is also a completely new product in the market called “clear coat blender” This product does exactly what it mixes it has recently cloak using the old one. There needs to be treated when the layers continues be wet. Wait about 30 days before applying wax.

As you can see, it is very easy to repair scratches in the paint of the car at home. All you want is a time effective, good products and recommendations.